Standing Seam & Batten Roll

Traditional standing seam trays can be installed to roofs, façade and soffit areas and should be fixed to a fully supported deck using stainless steel cleats. The substrate may be a ventilated timber deck, Rigid PIR Insulation onto a plywood or concrete deck, Composite metal faced insulation board or in high humidity locations Cellular Glass may be required. The standing seam has a traditional appearance popular with both architects and specifiers.

The standing system can be fabricated in the following materials;

• Zinc
• Copper, Brass and Bronze
• Stainless steel
• Coated steel
• Coated aluminium

Due to the highly skilled detailing requirements, it is recommended this system is installed by fully trained and competent installers only.

The batten roll is one of most traditional roofing systems and is popular on traditional buildings such as churches and listed buildings where it can offer a great alternative to lead, where theft continues to be an issue. The capping can be supplied as either a loose or welted cap and is traditionally installed using Copper, Zinc or Stainless Steel, although other metals could be fabricated in this system.

We are also able to fabricate a round loose cap which gives an appearance likened to that of traditional timber roll leadwork when installed using weathered zinc or stainless steel.

Due to the highly skilled detailing requirements, it is recommended this system is installed by fully trained and competent installers only.